Analysis of modern technologies and materials in arthroplasty
Abstract
Injuries and diseases of the musculoskeletal system are the second most common cause of temporary disability of the population and the third leading cause of disability and death. An effective treatment of these patients is arthroplasty. Annually 500–1000 patients per 1 million people in the world need prosthetics. In modern traumatology and orthopedics there has been a tendency to personified arthroplasty. The use of titanium alloys for the manufacture of implants allow most fully realize the important benefits: the best biocompatibility, high corrosion resistance, low modulus, high specific strength and endurance.
About the Authors
G. P. Kotelnikov
Samara State Medical University
Russian Federation
Russian Federation
Samara
A. V. Kolsanov
Samara State Medical University
Russian Federation
Russian Federation
Samara
A. N. Nikolaenko
Samara State Medical University
Russian Federation
Russian Federation
Samara
N. V. Popov
Samara State Medical University
Russian Federation
Russian Federation
Samara
V. V. Ivanov
Samara State Medical University
Russian Federation
Russian Federation
Samara
A. E. Scherbovskih
Samara State Medical University
Russian Federation
Russian Federation
Samara
S. A. Prichodko
Samara State Medical University
Russian Federation
Russian Federation
Samara
P. V. Platonov
Samara State Medical University
Russian Federation
Russian Federation
Samara
References
1. Загородний Н.В. Эндопротезирование тазобедренного сустава. Основы и практика. Монография. М.: ГЭОТАР-Медиа. 2011, с. 704.
2. Wang X., Masilamani N., Mabrey J. et al. Changes in the Fracture Toughness of Bone May Not Be Reflected in Its Mineral Density, Porosity, and Tensile Properties. Bone. 1998, No. 23 (1), p. 67-72.
3. Алиев М.Д. Детская онкология. Национальное руководство. Учебник. М.: ГЭОТАР-Медиа. 2012, с. 380.
4. Алиев М.Д., Сушенцов Е.А. Современная онкоортопедия. Саркомы костей, мягких тканей и опухоли кожи. М.: Фармарус Принт Медиа. 2012, № 4, с. 3-10.
5. Bickels J., Wittig J., Kollender Y. et al. Distal Femur Resection With Endoprosthetic Reconstruction. Clinical Orthopaedics and Related Research. 2002, No. 400, p. 225-235.
6. Von Wilmowsky C., Moest T., Nkenke E. et al. Implants in bone: Part I. A current overview about tissue response, surface modifications and future perspectives. Oral and Maxillofacial Surgery. 2013, No. 18 (3), p. 243-257.
7. Von Wilmowsky C., Moest T., Nkenke E. et al. Implants in bone: Part II. Research on implant osseointegration. Oral and Maxillofacial Surgery. 2013, No. 18 (4), p. 355-372.
8. Попович А.А., Суфияров В.Ш., Полозов И.А. и соавт. Применение аддитивных технологий для изготовления индивидуальных компонентов эндопротеза тазобедренного сустава из титановых сплавов. М.: Медицинская техника. 2016, № 3, с. 43-46.
9. Andani M., Shayesteh Moghaddam N., Haberland C. et al. Metals for bone implants. Part 1. Powder metallurgy and implant rendering. Acta Biomaterialia. 2014, No. 10 (10), p. 4058-4070.
10. Chan I., Ginsburg G. Personalized Medicine: Progress and Promise. Annual Review of Genomics and Human Genetics. 2011, No. 12 (1), p. 217-244.
11. Малышкина С.В., Маколинец В.И., Вишнякова И.В. Влияние импульсного низкоинтенсивного ультразвука на остеоинтеграцию имплантатов (обзор литературы). Ортопедия, травматология и протезирование. Харьков, 2012, № 2 (257), с. 122-130.
12. Andriyanov D., Amosov A., Samboruk A. et al. Development of porous composite self-propagating high-temperature ceramics of the Ti-B-C system. Russian Journal of Non-Ferrous Metals. 2014, No. 55 (5), p. 485-488.
13. Drnovšek N., Rade K., Milačič R. et al. The properties of bioactive TiO2 coatings on Ti-based implants. Surface and Coatings Technology. 2012, No. 209, p. 177-183.
14. Elahinia M., Hashemi M., Tabesh M., Bhaduri S. Manufacturing and processing of NiTi implants: A review. Progress in Materials Science. 2012, No. 57 (5), p. 911-946.
15. Vandrovcova M., Jirka I., Novotna K. et al. Interaction of Human Osteoblast-Like Saos-2 and MG-63 Cells with Thermally Oxidized Surfaces of a Titanium-Niobium Alloy. PLoS ONE. 2014, No. 9 (6), p. 100475.
16. Mohseni E., Zalnezhad E., Bushroa A. Comparative investigation on the adhesion of hydroxyapatite coating on Ti–6Al–4V implant: A review paper. International Journal of Adhesion and Adhesives. 2014, No. 48, p. 238-257.
17. Sallica-Leva E., Jardini A., Fogagnolo J. Microstructure and mechanical behavior of porous Ti–6Al–4V parts obtained by selective laser melting. Journal of the Mechanical Behavior of Biomedical Materials. 2013, No. 26, p. 98-108.
18. Wu Y., Wang A., Zhang Z. et al. Laser alloying of Ti–Si compound coating on Ti–6Al–4V alloy for the improvement of bioactivity. Applied Surface Science. 2014, No. 305, p. 16-23.
19. Variola F., Lauria A., Nanci A., Rosei F. Influence of Treatment Conditions on the Chemical Oxidative Activity of H2 SO4/H2 O2 Mixtures for Modulating the Topography of Titanium. Advanced Engineering Materials. 2009, No. 11 (12), p. B227-B234.
20. Wang J., Chao Y., Wan Q. et al. Fluoridated hydroxyapatite coatings on titanium obtained by electrochemical deposition. Acta Biomaterialia. 2009, No. 5 (5), p. 1798-1807.
21. Hamburg M., Collins F. The Path to Personalized Medicine. New England Journal of Medicine. 2010, No. 363 (4), p. 301-304.
22. Hodgson D., Wellings R., Harbron C. Practical perspectives of personalized healthcare in oncology. New Biotechnology. 2012, No. 29 (6), p. 656-664.
23. Jain K. From Molecular Diagnostics to Personalized Medicine. Expert Review of Molecular Diagnostics. 2002, No. 2 (4), p. 299-301.
24. Амирасланов А.Т., Надзханов С.Р. Значение компьютерной томографии в диагностике доброкачественных опухолей и опухолеподобных образований костей. Хирургия. Журнал им. Н.И. Пирогова. М.: Издательство «Медиа Сфера». 2012, № 5, с. 60-62.
25. Каблов Е.Н. Аддитивные технологии – доминанта национальной технологической инициативы. Интеллект и технологии. М.: 2015, № 2 (11), с. 52-55.
26. Юрасёв Н.И. О возможностях развития аддитивных технологий в России. Современная экономика: проблемы и решения. Воронеж: Воронежский государственный университет. 2015, № 9 (69), с. 72-79.
27. Vignoletti F., Abrahamsson I. Quality of reporting of experimental research in implant dentistry. Critical aspects in design, outcome assessment and model validation. Journal of Clinical Periodontology. 2012, No. 39, p. 6-27.
28. Vandeweghe S., Nicolopoulos C., Thevissen E. et al. Immediate Loading of Screw-Retained All-Ceramic Crowns in Immediate Versus Delayed Single Implant Placement. International Journal of Prosthodontics. 2013, No. 26 (5), p. 458-464.
29. Jain K. Nanobiotechnology and Personalized Medicine. Progress in Molecular Biology and Translational Science. 2011, p. 325-354.
30. Tunn P., Fehlberg S., Andreou D., Kettelhack C. Stellenwert der Beckenendoprothetik in der operativen Therapie von Tumoren des knöchernen Beckens. Zeitschrift für Orthopädie und Unfallchirurgie. 2007, No. 145 (6), p. 753-759.
31. Smelov V., Sotov A., Murzin S. Particularly Selective Sintering of Metal Powders by Pulsed Laser Radiation. Key Engineering Materials. 2016, No. 685, p. 403-407.
32. Wang M., Castro N., Li J. et al. Greater Osteoblast and Mesenchymal Stem Cell Adhesion and Proliferation on Titanium with Hydrothermally Treated Nanocrystalline Hydroxyapatite/Magnetically Treated Carbon Nanotubes. Journal of Nanoscience and Nanotechnology. 2012, No. 12 (10), p. 7692-7702.
33. Вельдяксова Л.В., Разумный В.А. Возможности использования поверхностно-пористых дентальных имплантатов в условиях дефицита костной ткани. Стоматология. М.: Издательство «Медиа Сфера». 2012, т. 91, № 2, с. 57-60.
34. Wennerberg A., Albrektsson T. Effects of titanium surface topography on bone integration: a systematic review. Clinical Oral Implants Research. 2009, No. 20, p. 172-184.
35. Вагапова В.Ш., Мухаметов У.Ф., Рыбалко Д.Ю. Сравнительная характеристика результатов применения имплантатов из титановых сплавов различной модификации в травматологии и ортопедии. Медицинский вестник Башкортостана. Уфа: Башкирский государственный медицинский университет. 2012, т. 7, № 5, с. 68-71.
36. Mishnaevsky L., Levashov E., Valiev R. et al. Nanostructured titanium-based materials for medical implants: Modeling and development. Materials Science and Engineering: R: Reports. 2014, No. 81, p. 1-19.
37. Нейштадт Э.Л., Маркочев А.Б. Опухоли и опухолеподобные заболевания костей. Руководство для врачей. Монография. СПб.: Фолиант. 2007, с. 378.
38. Алиев М.Д. Злокачественные опухоли костей. Саркомы костей, мягких тканей и опухоли кожи. М.: «Фармарус Принт Медиа». 2010, № 2, с. 3-8.
Review
For citations:
Kotelnikov G.P., Kolsanov A.V., Nikolaenko A.N., Popov N.V., Ivanov V.V., Scherbovskih A.E., Prichodko S.A., Platonov P.V. Analysis of modern technologies and materials in arthroplasty. Bone and soft tissue sarcomas, tumors of the skin. 2016;(4):18-24. (In Russ.)
Views:
120
Email this article 
